Factory supply of Polyaluminium Chloride for textile wastewater treatment

polyaluminium chloride for wastewater 1.Al2O3 content:28-30% 2.COA, MSDS, ISO9000 3.Basicity:40~90% 4.Provide free sample

 Brief introduction of poly-aluminum chloride

Poly-aluminium chloride is an inorganic polymer coagulant, because of the hydroxyl ion bridging and polyvalent anion polymerization production of larger molecular weight, high charge of inorganic polymer water treatment chemicals.

Poly-aluminium basic informationm chloride

English name: Polyaluminium Chloride, abbreviated PAC

EINECS: 215-477-2

CAS NO: 1327-41-9

Molecular formula: Al2Cl (OH) 5

Technical standards: national standards for product quality in line with GB15892-2009

Appearance: white, golden yellow, tawny, reddish brown granule/Flake

PAC use precautions, and dosage

1, according to the different raw water conditions, can do small trial first before seeking the best dose. For ease of calculation, configuration test solution by weight (w/w), with 2~5% distribution as well.. With 3% solution: solid 3G of poly aluminum chloride, wash 200ml sung in the graduated cylinder, jiaqingshuiyue 50ml, dissolution and dilute with water to 100ml scale again, shake the can.

2, poly aluminum chloride for the production of solid: 1:15 clear water =1:9 to weight ratio (liquid product is 1:2 per cent) mix dissolve. Hydrolysis of aluminum oxide content of less than 1% solution, will reduce effectiveness of high concentration is too easy addition of uniform.

3, dosing scale seeking the best dosing the amount of dosing, and look at adjusting in the running.  See fewer sedimentation tanks alum, and dark, the dosing volume is too small; As seen on sedimentation alum and, cloud high, the dose should be adjusted.

 

Classification of poly-aluminum chloride

A, drum-type polyaluminum chloride content in General, water insoluble high, usually used in wastewater treatment.

B, plate-and-frame type poly high aluminum chloride content, insoluble matter in water, wastewater treatment and drinking.

C, spray drying poly high aluminum chloride content, water-insoluble, dissolve faster. And higher standards for drinking water treatment.

 

Use

A, urban water supply and drainage cleaning: water, groundwater, river water, reservoir.

B, industrial water purification.

C, urban wastewater treatment.

D, useful substances in industrial waste water and solid waste recycling, promoting the settlement of pulverized coal in coal washing waste water recovery of starch, starch manufacture.

E, industrial wastewater treatment: wastewater from printing and dyeing, leather, heavy metal waste water, waste water, fluoride-containing wastewater, coal washing waste water containing oil wastewater treatment, paper making, metallurgy, mine wastewater, wastewater from the brewing wastewater effluent.

 

Packaging of polymeric aluminum chloride and points for attention

1, plastic bags, plastic film set in, each bag of net weights 25kg, also can be modified according to user requirements, while liquid polyaluminium chloride sales.

2, this product is the prohibition of poisonous substances mixed loading, transportation and storage, the product should be kept in indoor drying, ventilation, shade, and do not damp.

 

How to use

1, use should be made according to the quality scale, elect water purification effect is good, put a small amount of the best points. Solution should be mixed with used, amount of non-drinking water should be selected according to the actual situation.

2, when using solid, and water dissolved with the distribution of 10-25% solution and diluted to the required concentration of water, slowly feeding first when dissolved in water, and stir it constantly.

3 different brands of water treatment chemicals, different manufacturers or cannot be mixed, and shall not be mixed with other chemicals to save.

4, ML and diluent slightly corrosive, but lower than other inorganic flocculants.

5, effective storage products: liquid for half a year, two years solid.

Solid product after the tide can still be used.

6, this product has been a reasonable addition, purify the water quality after compliance with drinking water standards

 Specification

Index name	Test  data
Alumina(Al2O3)/%	28-30
Basicity/%	40-90
Water Insoluble/%          ≤	1.0
PH(1%aqueous solution)	3.5-5.0
Ammonia nitrogen (N)%     ≤	0.01
Arsenic (As)%              ≤	0.0001
Lead(Pb) %                ≤	0.0005
Cadmium(Cd)%            ≤	0.0001
Mercury(Hg) %             ≤	0.00001
Chrome(Cr +6 ) %           ≤	0.0005
The concentration of N, As, Cd , Hg, Chrome(Cr +6 ) and other impurities counts by 10.0% Al 2O 3.

Factory supply of Polyaluminium Chloride for textile wastewater treatment