Factory supply the effect PAC for Water Treatment Plant

PAC 1.Factory supply 2.Water- insoluble(m/m):<1.0% 3.Basicity%: 40~90 4.PH Value: 3.5-5.0

Factory supply wastewater treatment chemical PAC

  

1. Product introduction:

 This product is a kind of inorganic polymer flocculant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridges, sediment trap etc mechanism function, make edema subtle aerosols and colloidal ions off firm, gathered, flocculation, coagulation, precipitation to purify the treatment effect.

1).It is widely used in drinking water ,industrial waste water and sewage disposal areas;

2).PH:3.5-5.0,water insolube:<1.0.

 

2. Product Advantages:

1). Flocculation ability, high adsorption activity, floc formation and deposition of fast2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation3). In order to significantly reduce the stirring, mixing, precipitation, time, and to flocculation, sedimentation tanks and other small4). In addition to iron, manganese, and can be obtained with low conductivity water5). Equipment is simple, use easy to operate, less corrosion and better working conditions, low processing costs.

 

3. package and storage:

25 kg packed in two-layer bag with the interor in plastic and the exterior the woven or as your request .

 

4. Warmth remind:

the product shall be sealed and stored in the dry and ventilated place to prevent it from rain,high temperature and strong sunlight .The shelf life of product is 12 months.

 

5. Product  technical indexes:

ITEM	Standard
AL2O3  (m/m):%	30	28~29
Water- insoluble(m/m):%≤	0.3	1.0
Basicity%	40~90	40~90
As(m/m):%≤	0.0002	0.0003
Pb(m/m):%≤	0.001	0.002
Cd(m/m):%≤	0.0002	0.0003
Hg(m/m):%≤	0.00001	0.00001
Cr6+ (m/m):%≤	0.0005	0.0005
Ph Value	3.5~5.0	3.5~5.0

Factory supply the effect PAC for Water Treatment Plant